BT SYNERGY 4500 - Manual (Page 16)

Synergy 4500 – Issue 5 – Edition 1 – 18.01.07 – 7993
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Switch the handset power on/off
Press and hold to switch off.
Press to switch back on.
Make an external call
1. Lift the handset and press . The icon is
displayed.
2. When you hear the dialling tone, dial the number you
want.
Preparatory dialling
1. Enter the number first. If you make a mistake, press
to delete the last digit.
2. Press to dial.
End a call
1. Press .
Or
Place the handset back on the base/charger.
LNR
LNR
When you make a call, the Calls
light on the handset comes on and
the In Use light on the base
flashes.
Call timer
Your handset will automatically
time the duration of all external
calls. The handset display shows
the call duration both during and
for a few seconds after your call.
Press to delete any incorrect
digits
The symbol on the display
indicates when you are in range of
the base. If the symbol flashes and
you hear a warning beep, you are
out of range and will need to move
closer to the base.
16
Using the phone