BT SYNERGY 4500 - Manual (Page 10)

If you subscribe to a Caller Display
Service from your network provider
the time will be set when you
receive your first call.
Set the time
1. Press or until Date & Time Settings is
displayed then select OK option.
2. Press or until Set Time is displayed, select the
OK option. The first digit is highlighted.
3. Enter the current time in 24-hour format, e.g. for
9:24pm press , , , , then select the OK
option. You will hear a confirmation tone.
4. Press and hold to exit and return to standby.
Set the date
1. Press or until Date & Time Settings is
displayed then select OK option.
2. Set Date is displayed, select the OK option. The first
digit is highlighted.
3. Enter the current date (dd/mm/yy) e.g. for 15th February
2006, press , , , , , , then select
OK option. You will hear a confirmation tone.
4. Press and hold to exit and return to standby.
Your BT Synergy 4500 is ready for use .
6 0 2 0 5 1
Menu
Menu
4 2 1 2
Menu
Menu
Menu
Menu
10 Getting started
Synergy 4500 – Issue 5 – Edition 1 – 18.01.07 – 7993
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]