BT SYNERGY 4500 - Manual (Page 42)

42
If you experience any problems, please call the Helpline on 0870 605 8047
Base loudspeaker volume
You can adjust the base loudspeaker volume from 0
(volume off) to 9, plus H (maximum volume). The default
level is 5.
1. Press to increase the volume or to decrease
the volume.
Answer delay
Answer delay sets the number of times your BT Synergy
4500 will ring before the answer machine picks up your
call and starts playing the outgoing message.
You can change this setting to between 2-9 rings or time
saver (t). The default setting is 6 rings.
To change the answer delay setting via the base
1. Press and hold until the current setting is
announced, then release.
2. Press and release repeatedly to scroll through the
settings, until you reach the setting you want. With each
press the option will be announced and shown on the
base display.
When you hear the setting you want, do not press the
button again. After a short delay your chosen
Answering machine
Synergy 4500 – Issue 3 – Edition 1 – 21.08.06 – 7771
For more information on Time
Saver setting, see page 54.
Time Saver is displayed on the
base unit as
t and on the handset
as Time Saver .
If you adjust the volume when the
answering machine is not being
used, a beep sounds at each press.
When the volume reaches its
highest or lowest levels two beeps
will sound.