Dialing options, Access codes and credit card numbers, Pause – Brother FAX 1840C User Manual
Page 85: Dialing options -6, Access codes and credit card numbers -6 pause -6
5 - 6 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Dialing options
Access codes and credit card numbers
Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the
time and destination. To take advantage of low rates, you can store
the access codes or long-distance carriers and credit card numbers
as One-Touch and Speed-Dial numbers. You can store these long
dialing sequences by dividing them and setting them up as separate
One-Touch and Speed-Dial numbers in any combination. You can
even include manual dialing using the dial pad. (See Storing
One-Touch Dial numbers on page 5-1 and Storing Speed-Dial
numbers on page 5-2.)
For example, perhaps you have stored ‘555’ on One-Touch key
1
and ‘7000’ on One-Touch key
2
. If you press One-Touch key
1
,
One-Touch key
2
, and then
Black Start
or
Color Start
, you will
dial ‘555-7000’.
To temporarily change a number, you can substitute part of the
number with manual dialing using the dial pad.
For example, to change the number to 555-7001 you could press
One-Touch key
1
and then press
7001
using the dialing pad.
Pause
Press
Redial/Pause
to insert a 3.5-second pause between
numbers. If you are dialing overseas, you can press
Redial/Pause
as many times as needed to increase the length of the pause.
If you must wait for another dial tone or signal at any point in the
dialing sequence, store a pause there in the number by pressing
Redial/Pause
. Each key press adds a 3.5-second delay.