Brother FAX 1840C - Manual (Page 48)

GETTING STARTED 2 - 6
Setting the Speaker Volume
You can adjust the speaker volume.
1
Press Menu/Set , 1 , 4 , 3 .
2
Press ▲ or ▼ to select
Low , Med , High or Off .
Press Menu/Set .
3
Press Stop/Exit .
—OR—
Press Hook , and then adjust the speaker volume by pressing
or . The LCD shows the setting you are choosing. Each
key press changes the volume to the next setting. The new
setting will remain until you change it again.
FAX-1940CN only
When ( Fax ) is illuminated you can also change the speaker
volume in the following ways:
Press Speaker Phone , and then adjust the speaker volume by
pressing or . The LCD shows the setting you are
choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.
—OR—
You can adjust the speaker volume while you are listening to
your OGM (Outgoing Message) and ICMs (Incoming Messages)
by pressing
or .
If you turn Incoming Recording Monitor to OFF ( Menu/Set , 2 ,
7 , 3 ) the Speaker for screening calls will be disabled and you
won’t hear callers leaving messages. The volume for other
operations can still be controlled using
or .
3.Speaker