Barco E-2320 C (SE) - Manual (Page 79)

Display operation
79
Settings
Name Description
DPMS Switch on/off the automatic power saving
system (DPMS)
Power LED Switch the power LED on/off. Note: The
LED's orange DPMS state is not influenced
by this setting. So, when the display goes
into power-saving mode, the LED will turn
orange, even if it was switched off by this
setting.
User Controls Disable the control wheel functions
Color Temp. Select a color temperature
Preferred Input Freq. Click the control wheel to select the desired
vertical frequency of the input video signal.
Select the best frequency corresonding to
your graphic board (see the documentation
of your graphic board).
After changing this setting you must reboot
the PC so that the graphic board changes
the vertical frequency of the video signal.
Automatic Menu Exit Switch the automatic menu exit feature on/
off. When switched on, the OSD menus
automatically close when left idle for some
time.