Brother FAX-222 - Manual (Page 62)

8 - 4 T E L E P H O N E S E R V I C E S
Registering a Caller ID Number
You can set up a caller in the Caller ID Log as a One Touch or Speed Dial number.
1
Press Hold .
2
After 2 seconds, press or to scroll
through the Log and when you see a caller
you want to register, press
Function/Set .
3
To register the caller as a One Touch
number, press the One Touch key where you
want the number to be stored.
—OR—
To register the caller as a Speed Dial number,
press
Search/Speed Dial and use the dial
pad to press the two-digit location code (01–
08 or 01-12 or 01-50), and press
Function/Set .
4
Enter the caller’s name and press Function/Set .
5
Press or to select the type of number and press Function/Set :
6
Press or to select if you set ANTI-JUNK to ON (or OFF) and press
Function/Set .
7
Return to Step 2 to store another auto dial number—OR—Press Stop to exit.
If the LCD shows REGISTERED, the auto dial location already has a number.
FAX A fax number
TEL A telephone (voice) number
FAX/TEL Both a fax and telephone number
CHAIN A number, usually an access code, for chain dialing
SELECT <- -> & SET
PRESS START KEY
CALLER ID LOG
03)ABC COMPANY
03)02/01 12:00
03)9087772837
DIAL:PRESS START
NAME:
ENTER & SET