Neff C47D22N3GB - Manual (Page 10)

10
3. Turn the temperature selector to change the default
temperature.
A default cooking time appears in the clock display. The KJ
and x (cooking time) symbols light up.
4. Turn the rotary selector to change the default cooking time.
The new cooking time is saved automatically after 3 seconds.
5. Press the Start button.
If you do not press the Start button, an audible signal sounds.
When é Steam cooking, the cooking time does not start until
the heating up time has elapsed.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (fig. A)
■
Appliance reheating (fig. B)
Current temperature
Press the
± info button.
The current temperature is displayed for 3 seconds.
Displaying and changing the cooking time.
Press the
KJ clock function button repeatedly until the KJ
and x symbols light up. The current cooking time is displayed.
Turn the rotary selector to change the cooking time. The
change is saved automatically.
Changing the temperature
You can change the temperature at any time. To change the
temperature, turn the temperature selector until the required
temperature is displayed.
Pause
Briefly press the Stop button to interrupt cooking (pause). The
cooling fan may continue running. Press the Start button to
restart.
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the Start
button to restart.
If you have switched on the Auto start, there is no need to
restart the appliance (see section: Basic settings).
Display Î
When the water tank is empty, an audible signal sounds and
the Î indicator appears. Cooking is interrupted.
1. Open the appliance door carefully.
N.B.: Hot steam will escape.
2. Remove the water tank, fill up to the "max" mark and slide the
tank back in.
3. Press the Start button.
Switching off the appliance
:
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the Stop button to stop the cooking operation.
Once the cooking time has elapsed, the appliance switches off
automatically. A signal sounds. Press the KJ clock function
button to stop the signal.
The cooling fan may continue to run when you open the
appliance door.
Turn the operating mode selector back to the
Û position and
push it in to turn off the appliance.
You can see on the temperature display whether there is high
or low residual heat in the cooking compartment.
After each use
Emptying the water tank.
1. Open the appliance door carefully.
Hot steam will escape.
2. Remove and clean the water tank.
3. Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
:
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
1. Leave the appliance door ajar until the appliance has cooled
down.
2. Once it has cooled down, wipe out the cooking compartment
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
3. Remove food residues in the cooking compartment as soon
as the appliance has cooled down.
4. Wipe units and handles dry where condensation has formed.
Operating mode Temperature range Default cooking
time
é Steam cooking 35 - 100 °C 20 minutes
ä Reheat 80 - 100 °C 10 minutes
A Defrost setting 35 - 60 °C 30 minutes
$ %
Temperature display Meaning
• Residual heat high
œ Residual heat low