Preset operation, Setting the clock, Set the clock using the rotary selector – Neff U15M52N3GB User Manual
Page 10: Rapid heat up, Note, Turn the rotary selector clockwise, Checking, correcting or deleting settings, Preset operation setting the clock
10
Preset operation
The bottom oven switches on automatically and switches off at
the time preselected for the end of operation. To set this
function, combine the cooking time and end of operation clock
functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
1.
Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2.
Press the
KJ
clock function button repeatedly until
the
KJ
and
x
symbols light up.
3.
Set the cooking time with the rotary selector
(e.g.
‚
:
„‹
hours).
The setting is applied automatically.
4.
Press the
KJ
clock function button repeatedly until the
KJ
and
y
symbols light up.
5.
Set the end of operation using the rotary selector
(e.g.
‚ƒ
:
„‹
o'clock).
The bottom oven switches off and waits until the correct time
to switch on (in the example at
‚‚
:
‹‹
). The bottom oven
switches off automatically at the time set for the end of
operation
‚ƒ
:
„‹
6.
Turn the operating mode and temperature selector back to
the
Û
position.
7.
Press the
KJ
clock function button to exit the clock function.
Setting the clock
You can only change the clock when no other clock function is
active.
1.
Press the
KJ
clock function button repeatedly until
the
KJ
and
3
symbols light up.
2.
Set the clock using the rotary selector.
The setting is applied automatically.
Rapid heat up
With
3
CircoTherm®, you can shorten the heat up time if your
selected temperature setting is higher than 100 °C.
Note: During Rapid heat up, do not place any food in the
cooking compartment for as long as the
f
symbol is lit.
1.
Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
f
symbols light up and
Œ
is displayed in the clock
display.
3.
Turn the rotary selector clockwise.
In the clock display,
Ž
is displayed and the
f
symbol lights
up. Rapid heat up is activated for the bottom oven.
After reaching the set temperature, Rapid heat up switches off.
The
f
symbol goes out.
Checking, correcting or deleting settings
1.
To check your settings, press the
KJ
clock function button
repeatedly until the corresponding symbol lights up.
2.
If necessary, you can correct your setting using the rotary
selector.
3.
If you wish to cancel your setting, turn the rotary selector anti-
clockwise to the original value.