Setting cassette usage, Setting the print density, Toner save – Brother DCP1400 User Manual
Page 35
C U S T O M S E T T I N G S
4 - 2
Setting Cassette Usage
The default setting of
AUTO
allows your DCP to choose the optional Cassette
#2 if paper is out in Cassette #1 or if incoming faxes will fit best on the paper in
Cassette #2. Choose
CASSETTE#1 ONLY
,
CASSETTE#2 ONLY
or
CASSETTE USAGE
if you want to keep special paper in the other cassette and
control when it is used.
1
Press Menu/Set, 1, 1, 3.
2
Press
or
to select
CASSETTE
USAGE
, and then press Menu/Set.
3
Press
or
to select
AUTO
,
CASSETTE#1 ONLY
or
CASSETTE#2
ONLY
, and then press Menu/Set.
4
Press Stop.
Setting the Print Density
You can adjust print density, making your printed pages darker or lighter than
the original.
1
Press Menu/Set, 1, 4.
2
Press
to make print lighter, or
to
make print darker, and then press Menu/Set.
3
Press Stop .
Toner Save
You can conserve toner using this feature. When you set Toner Save to
ON
appears somewhat lighter. The default setting is
OFF
.
1
Press Menu/Set, 1, 5.
2
Press
or
to select
ON
(or
OFF
) and then press Menu/Set.
3
Press Stop.
3 . C A S S E T T E U S A G E
4 . P R I N T D E N S I T Y
5 . T O N E R S A V E