beautypg.com

Settings – Nokia 3660 User Manual

Page 39

background image

Copyright © 2003 Nokia. All rights reserved.

Settings

39

After three consecutive incorrect PIN code entries, the PIN code is blocked. If the PIN
code is blocked, you need to unblock the PIN code before you can use the SIM card
again. See the information about the PUK code.

PIN2 code (4 to 8 digits) - The PIN2 code, supplied with some SIM cards, is required

to access some functions, such as call cost counters.

Lock code (5 digits) - The lock code can be used to lock the phone and keypad to

avoid unauthorised use.

Note: The factory setting for the lock code is 12345. To avoid unauthorised
use of your phone, change the lock code. Keep the new code secret and in a
safe place separate from your phone.

PUK and PUK2 codes (8 digits) - The PUK (Personal Unblocking Key) code is required

to change a blocked PIN code. The PUK2 code is required to change a blocked PIN2
code. If the codes are not supplied with the SIM card, contact the operator whose SIM
card is in your phone for the codes.

You can change the following codes: lock code, PIN code, and PIN2 code. These codes can
only include the numbers from 0 to 9.

Note: Avoid using access codes similar to the emergency numbers, such as 112,
to prevent accidental dialling of the emergency number.

PIN code request

- When the PIN code request is active, the code is requested each time

the phone is switched on. Note that deactivating the PIN code request may not be
allowed by some SIM cards.

PIN code

/

PIN2 code

/

Lock code

- Open this setting if you want to change the code.

Tip! To lock the

phone manually, press

. A list of commands

opens. Select

Lock phone

.

Autolock period

- You can set an autolock period, a time-out after which the phone is

automatically locked and can be used only if the correct lock code is entered. Key in a
number for the time-out in minutes or select

None

to turn off the autolock period.

• To unlock the phone, key in the lock code.