Nokia 3205 - Manual (Page 81)

80 Copyright © Nokia 2004
■ Voice commands
You can set as many as five voice commands, which allow handsfree operation of
certain phone features.
Add a voice tag
Before using voice commands, you must first add a voice tag to the phone function.
1. At the start screen, select Menu > Voice > Voice commands and press Select .
2. Scroll to the phone function you wish to tag ( Profiles , Voice mailbox , Radio , Infrared ,
Voice recorder or Call log ) and press Select .
3. If necessary, scroll to an option associated with that function and press Select .
4. Press Options > Add command and press Select .
5. Press Start , and speak the voice tag clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone replays and then saves the recorded tag. The icon appears next to
commands which have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a command
by speaking the voice tag.
1. Press and hold Contacts (or Go to ).
2. When Please speak now appears, pronounce the voice tag clearly into the
microphone.
When the phone finds the voice tag, Found: appears, and the phone plays the
recognized voice tag through the ear piece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can choose one of the
following options:
• Select Playback to listen to the voice command tag.
• Select Change to change the voice command.
• Select Delete to erase the voice command tag.