Nokia 3205 - Manual (Page 56)

55 Copyright © Nokia 2004
Settings (Menu 4)
Prefix+ phone no.+ card no. —Dial the prefix (numbers that must precede the phone
number) and phone number you want to dial, then card number (+ PIN if required)
5. Enter the required information (access number or prefix and card number) and press
OK to confirm your entries.
6. Scroll to Card name and press Select .
7. Enter the card name and press OK .
Note: Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a call
using your calling card.
1. At the start screen, select Menu > Settings > Call settings > Calling card and
press Select .
2. Enter your lock code and press OK . (See Change the lock code, 65.)
3. Scroll to the calling card of your choice, select Options > Select > OK .
4. Press the End key to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1), that your calling card may require when you
make a calling card call.
See your calling card for instructions.
5. Press and hold the Send key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, press OK .
Receive data or fax calls
Data or fax calls is a network service. See Network services, 6 for
more information.
If your wireless service provider supports this feature, then you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface with
the keypad facing downward. Do not move the phone by holding it in your hand during
a data call.