Nokia 9000i - Manual (Page 39)

Chapter 4 - Telephone 4-9
Select a DTMF sequence. You can edit the se-
quence, or, if there are no stored sequences,
you can manually enter the DTMF string into
the field.
Press Send to send the DTMF sequence
shown in the input field, at the bottom of the
display.
Incoming faxes, short
messages and data
To receive faxes, short messages and incoming
data:
• The phone interface must be on.
• You must be within network coverage area.
While a data/fax connection is active (check the
call status indicator), you cannot make calls.
If you want to make a voice call, you can either
wait until the data/fax call ends, or you can end
the data/fax call by starting to make a call nor-
mally. When you press Call, you will be asked if
you want to end the data call. Press End data
call to confirm.