Nokia E55 - Manual (Page 61)

To check the current diverting status, scroll to the diverting
option, and select Options > Check status .
To stop diverting calls, scroll to the diverting option, and
select Options > Deactivate .
Call barring
Select Menu > Ctrl. panel > Settings and Phone > Call
barring .
You can bar the calls that can be made or received with the
device (network service). To change the settings, you need
the barring password from your service provider. Call barring
affects all call types.
To bar calls, select
Voice call barring and from the following:
• Outgoing calls — Prevent making voice calls with your
device.
• Incoming calls — Prevent incoming calls.
• International calls — Prevent calling to foreign countries
or regions.
• Incoming calls when roaming — Prevent incoming calls
when outside your home country.
• International calls except to home country — Prevent
calls to foreign countries or regions, but allow calls to your
home country.
To check the status of voice call barrings, select the barring
option and Options > Check status .
To deactivate all voice call barrings, select a barring option
and Options > Deactivate all barrings .
To change the password used for barring voice and fax calls,
select Voice call barring > Options > Edit barring
password . Enter the current code, then the new code twice.
The barring password must be four digits long. For details,
contact your service provider.
Bar net calls
Select Menu > Ctrl. panel > Settings and Phone > Call
barring > Internet call barring .
To reject net calls from anonymous callers, select
Anonymous call barring > On .
Send DTMF tones
You can send dual-tone multifrequency (DTMF) tones during
an active call to control your voice mailbox or other
automated phone services.
Send a DTMF tone sequence
1. Make a call, and wait until the recipient answers.
2. Select
Options > Send DTMF .
3. Enter the DTMF tone sequence, or select a predefined
sequence.
Attach a DTMF tone sequence to a contact card
1. Select Menu > Contacts . Select a contact and Options >
Edit > Options > Add detail > DTMF .
2. Enter the tone sequence. To insert a pause of about 2
seconds before or between DTMF tones, enter p. To set
© 2010 Nokia. All rights reserved. 61