Nokia E55 - Manual (Page 116)

Connectivity
Your device offers several options to connect to the internet,
a corporate intranet, another mobile device, or a computer.
Fast packet data
High-speed packet access (HSPA, also called 3.5G, indicated
with ) is a network service in UMTS networks and provides
high-speed data downloads and uploads. When HSPA support
in the device is activated and the device is connected to a
UMTS network that supports HSPA, downloading and
uploading data such as e-mail and browser pages through
the cellular network may be faster. An active HSPA connection
is indicated with . The icon may vary between regions.
To activate HSPA, select
Menu > Ctrl. panel > Settings and
Connection > Packet data > High speed packet access .
Some cellular networks do not allow incoming voice calls
when HSPA is active, in which case you need to deactivate
HSPA to receive calls. For more information, contact your
service provider.
For availability and subscription to data connection services,
contact your service provider.
Data cable
To avoid damaging the data, do not remove the data cable
in the middle of a data transfer.
Transfer data between your device and a PC
1. Insert a memory card to your device, and connect the
device to a compatible PC with the USB data cable.
2. When the device asks which mode is used, select Mass
storage . In this mode, you can see your device as a
removable hard drive in your computer.
3. End the connection from the computer (for example, from
an Unplug or Eject Hardware wizard in Windows) to avoid
damaging the memory card.
To use Nokia PC Suite with your device, install Nokia PC Suite
on your PC, connect the data cable, and select PC Suite .
To use your device to connect your PC to the web, connect the
data cable, and select Connect PC to web .
To synchronise the music in your device with Nokia Music
Player, install the Nokia Music Player software on your PC,
connect the data cable, and select PC Suite .
To print images on a compatible printer, select Image
transfer .
To change the USB mode you normally use with the data
cable, select Menu > Ctrl. panel > Connectivity > USB and
USB connection mode , and the desired option.
To set the device to ask for the mode each time you connect
the USB data cable to the device, select Menu > Ctrl.
panel > Connectivity > USB and Ask on connection >
Yes .
© 2010 Nokia. All rights reserved. 116