Restore factory settings, Phone software updates, Restore factory settings phone software updates – Nokia 6085 User Manual
Page 91: Download, Install

S e t t i n g s
58
Access codes
— to set the PIN code or UPIN code in use or to change the security
code, PIN code, UPIN code, PIN2 code, and call restrictions password.
Code in use
— to select whether the PIN code or UPIN code should be active.
PIN2 code request
— to select whether the PIN2 code is required when using
specific phone features that are protected by the PIN2 code. Some SIM cards do
not allow the code request to be turned off.
Authority certificates
or
User certificates
— to view the list of the authority or
user certificates downloaded into your phone. See “Certificates,” p. 76.
Security module settings
— to view
Security module details
, activate
Module PIN
request
, or change the module PIN and signing PIN. See also “Access codes,” p. 9.
■ Restore factory settings
To reset some of the menu settings to their original values, select
Menu
>
Settings
>
Restore settings
and enter the security code. Data that you have
entered or downloaded is not deleted. For example, names and numbers in
Contacts
are not affected.
■ Phone software updates
You may initiate phone software updates from the
Phone updates
menu. Also, your
service provider may initiate the updates by sending them over the air directly to
your device. This function is known as firmware over the air (FOTA).
Warning: If you install a software update, you cannot use the device, even
to make emergency calls, until the update is completed and the device is
restarted. Be sure to back up data before accepting a FOTA update.
Download
Select
Menu
>
Settings
>
Phone
>
Phone updates
to request available phone
software updates from your service provider. Select
Current software details
to
display the current software version. Select
Download phone software
to download
and install a phone software update (if an update is available). Follow the instructions
on the display.
Install
Select
Install software update
to start the installation, if you cancelled the
installation after the download.
The software update may take several minutes.
Note: If there are problems with the download or installation, contact
your service provider.