Nokia 6085 - Manual (Page 86)

S e t t i n g s
53
To add a new partner to the list, such as a new device, select Menu > Settings >
Connectivity > Data transfer > Options > Add contact > Phone sync or Phone
copy and enter the settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the partner list
and select
Options > Edit .
To delete a selected partner, select Options > Delete > OK . You cannot delete
Server sync and Phone sync .
Data transfer with a compatible device
For synchronization, Bluetooth wireless technology is used. The other device is in
the standby mode.
To start a data transfer, select Menu > Settings > Connectivity > Data transfer
and the transfer partner from the list other than Server sync and PC sync . Based
on the settings, the selected data is copied or synchronized. The other device also
must be activated to receive data.
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts from a compatible PC,
use Bluetooth wireless technology or a USB data cable (CA-53). You also need
the correct version of Nokia PC Suite software for your phone installed on the PC.
See “Computer connectivity,” p. 79 for information about Nokia PC Suite.
Synchronize the data in the phone contacts, calendar, and notes to correspond
with the data of your compatible PC by starting the synchronization from the PC.
Synchronize from a server
To use a remote internet server, you have to subscribe to a synchronization
service. For more information and the settings required for this service, contact
your service provider. You may receive the settings as a configuration message.
See “Configuration settings service,” p. 10 and “Configuration,” p. 56.
If you have saved data on the remote internet server, you can synchronize your
phone by starting the synchronization from your phone.
Select Menu > Settings > Connectivity > Data transfer > Server sync .
Depending on the settings, select Initializing sync or Initializing copy .
If the contacts or calendar are full, synchronizing may take up to
30 minutes to complete when synchronizing for the first time or after an
interrupted synchronization.