Receive data, Switch off bluetooth, Pc connections – Nokia 6682 User Manual
Page 91: Cd-rom, Your phone as a modem, Connection manager, Receive data switch off bluetooth, Cd-rom your phone as a modem
Co
n
n
ec
ti
vit
y
82
Receive data
When you receive data using a Bluetooth connection, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is shown, and the item is
placed in the
Inbox
folder in
Messaging
. Messages
received using a Bluetooth connection are indicated by
.
Switch off Bluetooth
To switch off Bluetooth connectivity, select
Bluetooth
>
Off
.
PC connections
You can use your phone with a variety of PC connectivity
and data communications applications, for example,
the MMC card reader. With Nokia PC Suite you can
synchronize contacts, calendar and to-do notes between
your phone and a compatible PC.
Always create the connection from the PC to synchronise
with the phone.
For further information on how to install Nokia PC Suite
(compatible with Windows 2000 and Windows XP), see
the User Guide for Nokia PC Suite and the Nokia PC Suite
help in “Install” section on the CD-ROM, if provided with
your phone, or visit
check availability.
CD-ROM
If a CD-ROM is supplied with the phone, the CD-ROM
should launch after you insert it into the CD-ROM drive of
a compatible PC. If not, proceed as follows: Open Windows
Explorer, right-click the CD-ROM drive where you inserted
the CD-ROM, and select Autoplay.
Your phone as a modem
You can use your phone as a modem to send and receive
e-mail or to connect to the Internet with a compatible PC
by using a Bluetooth connection or a data cable. Detailed
installation instructions can be found in the User Guide
for Nokia PC Suite in Modem options on the CD-ROM, if
provided with your phone, or visi
support to check availability.
Connection manager
You may have multiple data connections active at the same
time when you are using your phone in GSM networks. Select
Menu
>
Connect.
>
Conn. mgr.
to view the status of
multiple data connections, view details on the amount of
data sent and received, and end connections. When you
open
Conn. mgr.
, you can see the following information:
• Open data connections: data calls (
) and packet
data connections (
)