Nokia 6682 - Manual (Page 26)

Basic Ope
rations
17
Clock settings
To change the clock settings, select Options > Settings in
the clock.
To change the clock shown in the standby mode, scroll
down, and select
Clock type > Analog or Digital .
To change the alarm tone, scroll down, and select Clock
alarm tone .
To allow the mobile phone network to update the time,
date, and time zone information to your phone (network
service), scroll down, and select
Auto time update . For the
Auto time update setting to take effect, the
phone restarts.
To change the daylight-saving time status, scroll down,
and select
Daylight-saving . Select On to add one hour to
the My home city time. See “World clock‚" p. 17. When the
daylight-saving is active, the indicator is shown in the
clock main view.
World clock
Open Clock , and scroll right to open the world clock view.
In the world clock view, you can view the time in
different cities.
To add cities to the list, select Options > Add city . Enter
the first letters of the city name. The search field appears
automatically, and the matching cities are displayed.
Select a city. You can add a maximum of 15 cities to
the list.
To set your current city, scroll to a city, and select Options >
My home city . The city is displayed in the main clock view,
and the time in your phone is changed according to the
city selected. Check that the time is correct and matches
your time zone.
Make calls
Tip! To increase or decrease the volume during a
call, scroll left or right.
1 In the standby mode, enter the phone number, including
the area code. Press the clear key to remove a number.
For international calls, press * twice for the + character
(replaces the international access code), and enter the
country code, area code (omit the leading zero if
necessary), and phone number.
2 Press the call key to call the number.
3 Press the end key to end the call (or to cancel the
call attempt).
Tip! To change the phone number of your voice
mailbox, select
Menu > Tools > Voice mailbox >
Options > Change number . Enter the number
(obtained from your service provider), and
select
OK .