Nokia 6682 - Manual (Page 37)

C
o
n
tact
s (phone
book)
28
Voice dialing
You can make a phone call by saying a voice tag that has
been added to a contact card. Any spoken words can be a
voice tag.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are
dependent on the speaker's voice.
• You must say the name exactly as you said it when you
recorded it.
• Voice tags are sensitive to background noise. Record
voice tags and use them in a quiet environment.
• Very short names are not accepted. Use long names
and avoid similar names for different numbers.
Note: Using voice tags may be difficult in a
noisy environment or during an emergency, so
you should not rely solely upon voice dialing in
all circumstances.
Add a voice tag
Use a person’s name as a voice tag, such as “John’s mobile.”
You can have only one voice tag per contact card. You can
add a voice tag to up to 50 phone numbers.
1 In Contacts , open the contact card to which you want
to add a voice tag.
2 Scroll to the number to which you want to add the
voice tag, and select Options > Add voice tag .
Tip! To view a list of voice tags you have
defined, select
Contacts > Options > Contacts
info > Voice tags .
3 Select Start to record a voice tag. After the starting
tone, say clearly the words you want to record as a
voice tag. Wait until the phone plays the recorded tag
and saves it.
is displayed next to the number in the
contact card, indicating that a voice tag has been
added to it.
Voice tag call
You must say the voice tag exactly as you said it when you
recorded it. When you make a call using a voice tag, the
loudspeaker is in use. Hold the phone at a short distance
away, and say the voice tag clearly.
Press and hold the voice key. A short tone is played, and
Speak now is displayed. The phone plays the original voice
tag, displays the name and number, and dials the number
of the recognized voice tag.
Tip! To listen to, change, or delete a voice tag, open
a contact card, and scroll to the number with the
voice tag (indicated by
). Select Options >
Voice tags > Playback , Change , or Delete .