Nokia 6682 - Manual (Page 28)

Basic Ope
rations
19
Call waiting
You can answer a call while you have another call in
progress. To activate call waiting (network service), select
Menu > Tools > Settings > Call > Call waiting .
Tip! To change the phone tones for different
environments and events, see “Set tones‚" p. 22.
To answer the waiting call, press the call key. The first call
is put on hold.
To switch between the two calls, select Swap . Select
Options > Transfer to connect an incoming call, or a call
on hold, with an active call, and to disconnect yourself
from the calls. To end the active call, press the end key.
To end both calls, select
Options > End all calls .
Options
Many of the options that you can use during a call are
network services. Select
Options during a call for some of
the following options: Mute or Unmute , Answer , Decline ,
Swap , Hold or Unhold , Activate handset , Activate loudsp. ,
or Activate handsfree (if a compatible headset with
Bluetooth connectivity is attached), End active call or End
all calls , New call , Conference , and Transfer . Select from
the following:
Replace —To end an active call and replace it by answering
the waiting call.
Send touch tones —To send touch tone strings, for example,
a password. Enter the touch tone string or search for it in
Contacts. To enter a wait character (w) or a pause character
(p), press * repeatedly. Select
OK to send the tone.
Tip! You can add touch tones to the Phone
number or Touch tones fields in a contact card.
1-touch dialing
To assign a number to a 1-touch dialing key (2—9), select
Tools > 1-touch . Key 1 is reserved for the voice mailbox.
To call in the standby mode, press the 1-touch dial key and
the call key.
Tip! To use 1-touch dialing, select Menu > Tools >
Settings > Call > 1-touch dialing > On .
Conference calling
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call . The first call is automatically put on hold.
3 When the new call is answered, to join the first
participant in the conference call, select Options >
Conference .
To add a new person to the call, repeat step 2, and
select
Options > Conference > Add to conference .