Nokia 3200 - Manual (Page 123)

112 Copyright © 2004 Nokia
Because of the difference in printer tolerances, the selected image prints with
about 1/8 inch of overlap. Before printing on a cut-out cover template, it is
recommended that you do a test print on letter paper or postcard-size paper. After
you are satisfied with the test print, load the cut-out cover template into the
printer.
Use this procedure to print cut-out covers.
1 Launch the Nokia Image Converter on your PC.
2 Click Open New Image.
OR
Select File > Open from the menu.
3 Select the desired image file from the Look in drop-down box, and click Open.
The image is displayed in the viewer window.
4 Click Next.
5 In the Select phone drop-down box, select 3200 .
6 Click Next, and Cut-Out Covers.
An edit box appears on the image in the viewer window. You can use the edit
box to select the portion of the image that will be printed on the cut-out
cover.
7 To move the edit box, click and drag anywhere inside the box.
8 To resize the edit box, click and drag the adjustment handles on the corners
and sides of the box.
9 When you are satisfied with the image, click Next.
The Cut-Out Covers window appears, showing the image as it will appear on
the template.
10 To print the front cut-out cover, click Front > Print.
11 In the printer dialog box, specify the paper type as Postcard (if available) and
activate the printer.
12 To print the back cut-out cover, reload the same blank in the printer.
13 To use the same image for the back cut-out cover, click Back in the Cut-Out
Covers window; then click Print.
OR
To use a different image, repeat steps 2 through 11, clicking Back instead of
Front in step 10.