Toshiba Portege 7140 - Manual (Page 88)

7-2 Setup y la palabra clave de seguridad Manual del usuario
Portege 7140CT User's Manual – 7140_ES.doc – SPANISH – Printed on 22/12/99 as IM_714ES
Ejecución de TSETUP
1. Seleccione ¿Reiniciar el equipo en modo MS-DOS? de la
ventana Salir del sistema.
2. Una vez que se reinicie el ordenador en MS-DOS, escriba TSETUP y
pulse Enter. TSETUP muestra la pantalla SYSTEM SETUP.
La pantalla de TSETUP está dividida en dos páginas: SYSTEM SETUP
(1/2) y SYSTEM SETUP (2/2).
MEMORY
Total = 65536 KB
BATTERY
Battery Save Mode = Full Power
PASSWORD
Not Registered
DISPLAY
Power On Display = Auto-Selected
LCD Display Stretch = Disabled
TV Config.
BOOT PRIORITY
Boot Priority = FDD®HDD®CD-ROM®LAN
Power On Boot Select = Enabled
OTHERS
Power-up Mode = Boot
CPU Cache = Enabled
Level 2 Cache = Enabled
Processor Serial Number = Disabled
Auto Power On = Disabled
Alarm Volume = High
System Beep = Enabled
PERIPHERAL
Pointing Devices = Auto-Selected
Ext Keyboard "Fn" = Disabled
USB Legacy Emulation = Disabled
Parallel Port Mode = ECP
Hard Disk Mode = Enhanced IDE (Normal)
SYSTEM SETUP (1/2) ACPI BIOS version = x.xx
CONFIGURATION
Device Config. = All Devices
I/O PORTS
Serial = COM1(3F8H/IRQ4)
Built-in Modem = COM2(2F8H/IRQ3)
Parallel = LPT1(378H/IRQ7/CH3)
FLOPPY DISK I/O
Floppy Disk = (3F2H/IRQ6/CH2)
DRIVES I/O
HDD = Primary IDE(1F0H/IRQ14)
Dock = Secondary IDE(170H/IRQ15)
PCI BUS
PCI BUS = IRQ11
SYSTEM SETUP (2/2) ACPI BIOS version = x.xx
PC CARD
Controller Mode = Auto-Selected
↑↓←→ ↑↓←→ ↑↓←→ ↑↓←→
: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving Home: Set default values End: Save changes and Exit
La pantalla System Setup
Los elementos TV Config. y Dock sólo aparecen cuando hay un
dispositivo opcional DVD-ROM Docker II con adaptador Ethernet
conectado al ordenador.
El elemento Panel Power On/Off sólo aparece cuando el ordenador
está en modo Resume.