Toshiba Magnia 3100 - Manual (Page 72)

64 HW Diagnostics
Log Utilities
Log Utilities
This function logs error information generated while a test is in progress; it shows the results stored in
RAM.
The error logs can be checked by selecting [03. LOG UTILITIES] in the main menu.
Selecting [01.LOG UTILITIES] shows the following message:
LOG UTILITIES Screen
XXXXX ERRORS
The message shows the number of errors.
PASS COUNT
If the test parameter "Test Loop" is set as "Yes" in the test, the pass count is displayed.
CNT
It shows the number assigned, according to the order of occurrence of the errors.
TEST
XXX XX XX
digits 1-3 :
It shows the abbreviation of the test in which the error occurred.
MEMORY TEST RAM NPX TEST NPX
KEYBOARD TEST KBD CACHE MEMORY TEST CAH
DISPLAY TEST CRT SCSI TEST SCS
FLOPPY DISK TEST FDD CD-ROM TEST CDR
PRINTER TEST PRT SAF-TE TEST SAF
SCSI HDD TEST HDD BMC TEST BMC
digits 4-5:
It shows the subtest number in which the error occurred.
digits 6-7: It shows the step number in which the error occurred. (Depending on the
test, Digits 6-7 are not always displayed.)