Toshiba Magnia 3100 - Manual (Page 59)

51 HW Diagnostics
Running Test
Running Test (02.RUNNING TEST)
The following test parameter appears when you select "02 RUNNING TEST".
(To return to the Main Menu, select "99" or "Esc".)
Running TEST - TEST PARAMETER
[01.Go to Test]
To start the running test. If you need to stop the test program, press + .
[02.Test ITEM EDIT]
To choose the test items under the RUNNING Test.
[03.Finish BUZZER Sound]
When the Server finishes the running test, the beep sounds.
[99.Exit to DIAGNOSTICS MENU]
To return to the HW Diagnostics Main Menu.
In the initial setting, the following items are automatically executed:
01.MEMORY TEST 01.Conventional memory
03.DISPLAY TEST 01.VRAM W/R/C
03.DISPLAY TEST 02.640*480 Mode display
03.DISPLAY TEST 03.1024*768 Mode display
06.SCSI HDD TEST 02.Connection
07.NPX TEST 01.NPX test
08.CACHE TEST 01.Constant date test
08.CACHE TEST 02.Address pattern test
08.CACHE TEST 03.Increment / Decrement test
08.CACHE TEST 04.Caching data test
10.CD-ROM TEST 02.Random address read
11.SAF-TE TEST 01.SAF-TE TEST
04.FLOPPY DISK TEST 01.Sequential address read
When the test is completed, the test result appears on the screen in large text.
No error has been detected. OK
The test has been compulsorily ended, or any error has been detected. FAILED
NOTE: To check the error log, select [03.LOG UTILITIES] in the main menu. For the key operation on
the error log display, refer to "Checking error log" in this chapter. If the test in progress has been
stopped, the test result is not displayed.