Toshiba Magnia Z500 - Manual (Page 84)

Configuration screen (Front Panel Indicators)
The MAGNIA Z300 / MAGNIA Z310 is equipped with upper part and lower part of front panel
indicator, each displaying up to 16 characters (if a scroll is used, it displays 40 characters).
The front panel indicator has three display screens, and displays one of them.
These screens can be selected using the Display Change Button. One of the three screens
is used for notification of hardware-dependent faults. This screen is not displayed during
normal operation but is given priority over the other screens if a fault occurs.
The other screens are {Panel View 1} and {Panel View 2}.
On {Panel View 1}, information specific to the machine currently selected can be displayed or
edited. {Panel View 2} displays alarm information when an alarm is reported to the
Management Proxy.
Configuration screen (Front Panel Indicators)
Item Explanation
-Panel View 1-
You can edit the panel strings that indicate information
particular to the agent machine.
[Upper] edit box Specifies the characters provided on the upper part of the front
panel indicator.
[Lower] edit box Specifies the characters provided on the lower part of the front
panel indicator.
[Set] button Saves the specified character strings.
-Panel View 2- Displays the fault message from the agent.
-Upper- Displays the characters provided on the upper part of the front
panel indicator.
-Lower- Displays the characters provided on the lower part of the front panel
indicator.
[Initialize] button Initializes the character strings of the Panel View 2 back to the
default provided when this software was shipped.
74