Outline of individual functions, 2 outline of individual functions – Toshiba Magnia Z500 User Manual
Page 13
1.1.2 Outline of Individual Functions
This section provides an outline of individual functions of HEW.
Fault list display function
It is the function to display fault information of the Agent machine. The information is
stored on the Management Proxy.
Inventory collection function
It is the function to display the inventory of the Agent machine. The following information
is displayed.
RAID controller information (IDE RAID, SCSI RAID)
Product information (RAID, system BIOS, processor, SCSI, Application, etc.)
* Some types of information may not be collected depending on the platform.
(3.3.2 Product Information screen)
(3.3.4 IDE RAID Status screen)
(3.3.5 SCSI RAID Status screen)
Sensor status display function
It is the function to display status information on hardware components including the
power supply and fans.
The supported machine model for an Agent in the status of out-of-band: MAGNIA
Z300/Z310/Z500
S.E.L. (System Event Log) function
It is the function to record the data logged in nonvolatile memory on the motherboard. In
particular, this log contains hardware error information.
(3.3.11 S.E.L. (System Event Log) screen)
Automatic server restart function
It is the function to automatically reboot the server if the Agent machine is locked. If no
response is received from the system for the specified duration, the function automatically
reboots the Agent machine.
The supported machine model for an Agent: MAGNIA Z300/Z310/Z500,
MAGNIA3200/3300
Remote power control function
Turns on or off the power to the Agent machine from the Management Console.
The supported machine model for an Agent: MAGNIA Z300/Z310/Z500
(3.3.9 Remote Power Control screen)
3