beautypg.com

Starting the computer using a password, Toshiba hwsetup, Toshiba hwsetup -8 – Toshiba Satellite Pro C50-A User Manual

Page 93

background image

C:\Program Files\TOSHIBA\Utilities\
This utility lets you do the following:

Register or delete the Supervisor Password.
Specify restrictions for general users.

Starting the computer using a password

If you have already registered a user password, there is one way to start
the computer:

Enter the password manually.

The password is necessary only if the computer was shut down in
Hibernation mode or boot mode. It is not needed in Sleep mode and
Restart.

To enter a password manually, follow the steps as detailed below:
1.

Turn on the power as described in the

Getting Started

section. The

following message will appear in the screen:
Password=

At this point, the function keys do not work. They will function after you
enter the password.

2.

Enter the Password.

3.

Press ENTER.

If you enter the password incorrectly three times in a row, or if you don’t
enter the password within 1 minute, the computer shuts off. In this case,
some features that can power on the computer automatically (Wake-up on
LAN, Task Scheduler, etc) may not work. You must turn the computer back
on to retry password entry.

TOSHIBA HWSetup

TOSHIBA HWSetup is the TOSHIBA configuration management tool
available through the Windows operating system.
To run TOSHIBA HWSetup, click Start -> All Programs -> TOSHIBA ->
Tools & Utilities -> HWSetup
.
The TOSHIBA HWSetup window contains a number of tabs to allow
specific functions of the computer to be configured.
In addition there are also three buttons: OK, Cancel and Apply.

OK

Accepts your changes and closes the TOSHIBA
HWSetup window.

Cancel

Closes the window without accepting your
changes.

User's Manual

5-8

This manual is related to the following products: