beautypg.com

Restarting the computer, Sleep mode – Toshiba Satellite Pro C50-A User Manual

Page 25

background image

2.

Make sure all disk/disc activity has stopped before removing the disk/
disc.

If you turn off the power while a disk (disc) is being accessed, you may
lose data or damage the disk.
Never turn off the power while an application is running. Doing so
could cause loss of data.
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause
data loss.

3.

Click Start.

4.

Select Shut down from the Shut down options.

5.

Turn off any peripheral devices connected to your computer.

Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid any potential damage.

Restarting the computer

Certain conditions require that you reset the computer, for example if:

You change certain computer settings.

If you need to restart the computer, there are two ways this can be
achieved:

Click Start. Point to the arrow ( ) beside the Shut down button and
then select Restart from the menu.
Press CTRL, ALT and DELsimultaneously (once) to display the menu
window, and then select Restart from the Shut down options.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the computer into Sleep Mode. In this
mode data is maintained in the computer's main memory so that when you
turn on the power again, you can continue working right where you left off.

When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always completely
shut down the computer. This includes turning off any wireless
communication functionalities, and cancelling settings that reactivate the
computer automatically, such as a timer recording function. Failure to
completely shut down the computer in this way could allow the operating
system to reactivate and run pre-programmed tasks or preserve unsaved
data, which could interfere with aviation or other systems, possibly causing
serious injury.

User's Manual

2-7

This manual is related to the following products: