Intel rapid start technology – Toshiba KIRA User Manual
Page 39
using the internal LCD display only
The Display Power Saving Technology feature is enabled at factory default.
If you want to turn this feature off, please change it in the settings
accordingly in the Intel
®
HD Graphics Control Panel/Intel
®
Graphics and
Media Control Panel.
You can access this control panel in the following way:
Right-click on the desktop and click Graphics Properties...
In Intel
®
HD Graphics Control Panel:
1.
Click Power and select On battery.
2.
Click Off under Display Power Saving Technology.
3.
Click Apply.
If you want to enable this feature, under the conditions mentioned above,
click On under Display Power Saving Technology.
In Intel
®
Graphics and Media Control Panel:
1.
Click Power.
2.
Select On battery from the drop-down menu in Power Source.
3.
Clear the Display Power Saving Technology check box.
4.
Click OK.
If you want to enable this feature, under the conditions mentioned above,
select the Display Power Saving Technology check box.
Intel Rapid Start Technology
Your computer may support Intel
®
Rapid Start Technology which enables
the computer to change to Hibernation Mode from Sleep Mode after a
specified period of time.
With the Intel
®
Rapid Start Technology, the Windows can rapidly resume
from Hibernation Mode and battery life will be longer than when in Sleep
Mode.
Intel
®
Rapid Start Technology is enabled at factory default. The computer
will switch to Hibernation Mode after two hours of Sleep Mode.
You can use BIOS Setup to enable/disable the function and change the
specified time setting from Sleep Mode to Hibernation Mode.
1.
Launch the BIOS setup utility. Please refer to
section for further information.
2.
Select Advanced.
3.
Enable/Disable Intel(R) Rapid Start Technology function.
4.
You can select the period of time from Sleep Mode to Hibernation
Mode using Rapid Start Entry after. If the Immediately option is
selected, the computer will switch to Hibernation Mode immediately
after your computer goes into the Sleep Mode.
User's Manual
3-10