Toshiba W2333 - Manual (Page 11)

11
English
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear of the television.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to
the television.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media
player SAT socket to the decoder MEDIA REC. socket.
Before running Auto Tuning put your decoder and media recorder to Standby.
HDMI ® (High-De ¿ nition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
with digital audio and video output. It is designed for best performance with 1080i high-de ¿ nition
video signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also
support VGA, SVGA, XGA, WXGA and SXGA.
NOTE: Although this television is able to connect to HDMI equipment it is possible that some equip-
ment may not operate correctly.
A wide variety of external equipment can be connected to the back of the television, there-
fore the relevant owner’s manuals for all additional equipment must be referred to.
If the television automatically switches over to monitor external equipment, return to normal televi-
sion by pressing the desired channel button. To recall external equipment, press
to select.
NOTE: Due to copy protected signal in some DTV programme, non-scrambled content and scram-
bled content with “copy freely (CGMS-A: 00)” are available via SCART analog video and
audio output.
DTV Programme SCART Analog Output
Scrambled with CGMS-A: 00 (Copy Freely) Output via SCART
Scrambled with CGMS-A: 01 (Copy No More) Not output via SCART
Scrambled with CGMS-A: 10 (Copy Once) Not output via SCART
Scrambled with CGMS-A: 11 (Copy Never) Not output via SCART
Non- scrambled Output via SCART
*CGMS-A (Copy Generation Management System-Analog) is a copy protection mechanism for
analog television signals.