Toshiba Magnia 3200 - Manual (Page 14)

Magnia Rack Conversion Kit
14 TOSHIBA Europe GmbH
Magnia Rack Conversion Kit – 3030_3100_s00056-EN.doc – Gosen – Printed on 14/11/2001 as PRINTFILENAME
Installing the Server into a Rack Enclosure
To install components into the rack enclosure, follow the procedures
below and refer to 1-48 to 1-60.
1. Insert the server into its position in the rack.
2. Place the server on the guide rails (be sure to observe the caution
noted above).
3. Secure the eight screws (four on each side of the guide rail).
4. Grasp the handles and push the server fully into the rack.
5. Secure the thumbscrews.
6. Connect the monitor and keyboard cables.
7. Connect the AC cord.