Toshiba Magnia 3200 - Manual (Page 13)

Magnia Rack Conversion Kit
Version
7
Last Saved on 14/11/2001 11:48
TOSHIBA Europe GmbH 13
Magnia Rack Conversion Kit – 3030_3100_s00056-EN.doc – Gosen – Printed on 14/11/2001 as PRINTFILENAME
CAUTION:
Lifting the server out of the rack requires at least two people. To minimize
the weight, Toshiba recommends the removal of all power supplies and
HDDs prior to removing the system from the rack.
Do not pull out two or more units (Magnia and Expansion Disk Chassis) at
the same time. It may cause toppling down of the rack.
Do not put your weight on the system drawn from the rack. It may cause
the rails to break and the rack to topple.
Do not lean a ladder directly on the system. It may cause the rails to break
and the rack to topple.
Pull out system & check that the cables are connected to the back are not
caught.
When making maintenance, pull out the system to the front until the
system is fixed by the lock of rail.