BT PAPERJET 30 - Manual (Page 42)

42
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Dial and fax tones volume
You can adjust the volume for the line tones you hear when dialling and
connecting to another fax machine.
1. Press you hear the dial tone.
2. Press to adjust the volume which is displayed on the screen.
Beeps on/off
Your BT PaperJet 30 gives beeps to alert you to faults, errors etc. You can
switch these beeps to High, Med, Low or Off.
1. Press repeatedly until the display shows FAX SET-UP then press .
2. Press to display VARIOUS SETTINGS .
3. Press repeatedly until the display shows BUZZER VOL:LOW.
4. Press or to switch between HIGH, MED, LOW and OFF.
5. Press to confirm the option displayed.
6. Press to return to standby.
Transmission speed
Your BT PaperJet 30 is set to send faxes at 9600bps (9.6). If you
consistently fail to send faxes to a particular number it may help to
reduce the transmission speed to 4800bps (4.8).
1. Press repeatedly until the display shows FAX SET-UP then press .
2. Press to display VARIOUS SETTINGS.
3. Press repeatedly until the display shows TX SPEED 9.6.
4. Press or to switch between 4.8 and 9.6.
5. Press to confirm the option displayed.
6. Press to return to standby.
Additional settings