BT PAPERJET 30 - Manual (Page 29)

29
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
SMS Service centre numbers
Your BT PaperJet 30 is preset to send and receive text messages using
the BT service. If you want to use a different service you will need to
change the service centre numbers.
1. Press then or to scroll to CONFIGURATION.
2. Press to display SERV. CENTRE NO.
3. Press to display TX SERV. CENTRE 1470P1709400 .
You can delete this number using the button to enter a different one.
4. Press . Display shows RX SERV. CENTRE 080058752.
You can delete this number using the button to enter a different one.
5. Press .
6. Press to return to standby.
Sending texts
1. Press to display SMS SEND then to display SMS TEXT.
2. Use the keypad to write your text message.
3. When you have finished, press . Display shows TYPE NUMBER and
NUM/TOUCH/SPEED .
4. Enter the number you want to send to and press .
5. Display shows TERMINAL NO.:YES.
Unless you have been asked by your recipient to add a sub-address press
again to display SEND: YES. Press again to send the text.
If the person you are sending to has asked you to send to a specific
subaddress then use
or to display YES and press start to display
RECIP. TERM.NO.: 9 . You can now change the default subaddress (9) to
the required number and press to display SEND: YES. Now press
to send.
SMS
Button Character
@ space 1 . / -
a b c е д ж а з 2 Γ
d e f и И й 3 ∆ Φ
g h i ì 4
j k l 5 Λ
m n o с ц Ш т 6
p q r s ß 7 Π Σ
t u v ь щ 8
w x y z 9
space + & / 0 € £ ¥ $ ¿ ß ¡ Θ Ξ Ψ Ω
Character map