BT PAPERJET 30 - Manual (Page 18)

18
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Resolution
Resolution is identified by an arrow in the bottom left hand corner of the
display when there is a document in the document feeder. The arrow
normally points at the standard resolution
icon. The resolution can
be changed to Fine icon or Photo icon.
If sending text and drawings with fine detail, press until the arrow
appears above the fine resolution .
If sending photos, press until arrows appear above the fine and
photo resolution icons .
Sending faxes
1. Insert the document to be sent in the automatic document feeder.
The display shows DOCUMENT READY.
2. If required, set the contrast and resolution.
3. Dial the number – or use redial or the one touch or speed dial directories –
then press .
To cancel the fax during sending, press .
When the fax has been sent, the display shows TX COMPLETED.
Automatic redial
If your BT PaperJet 30 cannot get through to the other machine, it will
automatically redial the number up to 3 times.
Delayed sending
You can store a document in your machine’s memory and set a time for
it to be sent.
1. Insert the document to be sent and set the contrast and resolution if
required.
Faxing
If you make a mistake dialling, press (<>) to
move the cursor to the digit and overwrite it
with the correct one. Or press
to delete
the whole number.