BT PAPERJET 30 - Manual (Page 40)

40
BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
If connected to a switchboard, see page 61.
Voice call alert
If your BT PaperJet 30 is set to PHONE/FAX reception, it will
automatically alert you to voice calls with a 20 second tone. You can
change the duration of the tone, from 15 to 40 seconds.
1. Press repeatedly until the display shows INSTALLATION.
2. Press repeatedly until the display shows FAX/TEL TIMER:20.
3. Press or to scroll through the options: 15, 20, 30 or 40.
4. Press to confirm the option displayed.
5. Press to return to standby.
Remote start code
If you answer a call on an extension phone, before BT PaperJet 30 has
automatically answered, and then find it is a fax call, you can transfer the
call to the BT PaperJet 30 by pressing
on the keypad of your phone.
You can change the 5 to another number 0-9 or ✱ if required. You can
also switch remote start off.
1. Press repeatedly until the display shows INSTALLATION then
press to display TEL. LINE SET-UP.
2. Press again. The display shows PUBL.LINE(PSTN).
3. Press repeatedly until the display shows REMOTE START:ON.
4. To switch the code off, press or to scroll to OFF and press to
confirm.
Or
To change the code press . The display shows TYPE CODE above the
current code.
5. Enter the new code - or .
Additional settings