Pioneer VSX-1018AH-S - Manual (Page 26)

Controls and displays 04
26
En
Display
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 32).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (
DSD PCM lights during the DSD (Direct
Stream Digital) to PCM conversion with SACDs).
4 S.RTRV
Lights when the Sound Retriever is switched on
(page 69).
5 MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 57).
6 PHASE CONTROL
Lights when the Phase Control is switched on (page 11).
7 Sound processing indicators
Light according to the active Audio parameter(s)
(page 69) and/or
ANALOG ATT (page 72).
8 V.SB
Lights during Virtual surround back processing (page 33).
9 TUNER indicators
TUNED – Lights when a broadcast is being received.
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using
the
MPX button.
10 EON/RDS indicators
EON – Lights when the EON mode is set (flashes
during EON reception). The indicator lights when
the current station carries the EON service (page 37).
RDS – Lights when an RDS broadcast is received
(page 36).
11 SOUND
Lights when any of the Midnight, Loudness or bass/treble
controls feature is selected (page 69).
12 Master volume level
13 SR+
Lights when the SR+ mode is switched on (page 61).
14 STREAM DIRECT
Lights when Direct/Pure Direct is selected (page 32).
15 Speaker indicators
Indicate the current speaker system,
A and/or B (page 55).
16 Listening mode indicators
THX – Lights when a Home THX mode is selected.
ADV. SURROUND – Lights when an Advanced
Surround mode has been selected (page 30).
STEREO – Lights when the stereo mode is selected
(page 31).
STANDARD – Lights when a Standard Surround
mode is switched on (see
Listening in surround
sound on page 29).
17 SLEEP
Lights when the receiver is in sleep mode (page 72).
18 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2 Pro
Logic II /
2 Pro Logic IIx decoding (page 29).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 29).
19 Character display
Displays various system information.
20 Input source indicator
Lights to indicate the input source you have selected.
STREAM DIRECT
HDMI
PCM
L C R
SL S SR
SBL SB
LFE
SBR
AUTO
ADV.SURROUND
STANDARD
SLEEP
THX
STEREO
SP AB
DIGITAL
PRO LOGIC
DIGITAL
WMA9 Pro
SR+
DTS OVER ATT
S.RTRV MONO
dB
DIALOG E
PHASE CONTROL
STEREO
V.SB
TUNED
EON
RDS
N eo : 6 2
2
ANALOG
MULTI-ZONE
2HD
DSD PCM
DNR
SOUND
USB VIDEO TV DVD
HDMI DVR BDP
CD TUNER
CD-R iPod [ 1 ] [ 2 ]
2 1 3 7 6 5 9 10 12 11 13
19 15 14 17 20 18
4 8
16
VSX-1018AH_HY.book Page 26 Wednesday, February 27, 2008 9:08 PM