Pioneer VSX-1018AH-S - Manual (Page 24)

Controls and displays 04
24
En
Chapter 4:
Controls and displays
Front panel
1 INPUT SELECTOR dial
Use to select an input source.
2  STANDBY/ON
Switches the receiver between on and standby. Power
indicator lights when the receiver is on.
3 Remote sensor
Receives the signals from the remote control (see
Operating range of remote control unit on page 25).
4 PHASE CONTROL indicator – Lights when the Phase
Control is switched on (page 11).
ADVANCED MCACC indicator – Lights when one of
the MCACC presets (page 32) is selected.
1
DIGITAL PRECISION PROCESSING indicator –
Lights to indicate digital processing (for example, it
disappears when Pure Direct (page 32) is on, or when
listening through the multichannel analog inputs).
HDMI indicator – Blinks when connecting an HDMI-
equipped component; lights when the component is
connected (page 63).
5 MASTER VOLUME dial
6 Input source buttons
Press to select an input source.
7 VIDEO INPUT
See Connecting a component to the front panel inputs on
page 19.
8 iPod DIRECT USB terminal
Use to connect your Apple iPod as an audio source
(page 51), or connect a USB audio device for playback
(page 53).
9 MCACC SETUP MIC jack
Use to connect the supplied microphone.
10 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
MASTER
VOLUME INPUT
SELECTOR
STANDBY/ON
VSX-1018AH AUDIO/VIDEO MULTI-CHANNEL RECEIVER
PHONES
DVD BD TV SAT DVR 1/DVR 2 VIDEO HDMI CD CD-R iPod USB MULTI CH IN
HDMI
DIGITAL PRECISION
PROCESSING
ADVANCED
MCACC
PHASE
CONTROL
FM/AM
AUTO SURR/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND STEREO/
A.L.C.
ST + ST – SPEAKERS ON/OFF CONTROL
MULTI-ZONE
MCACC
SETUP MIC
iPod DIRECT
USB DIGITAL IN AUDIO R L VIDEO
VIDEO INPUT
PHONES
AUTO SURR/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
STEREO/
A.L.C.
ST + ST – SPEAKERS ON/OFF CONTROL
MULTI-ZONE
1 2 3 4 5
6 9 10 11
12
8 7
14 13
Note
1 The MCACC indicator does not light when the MCACC preset memory currently being selected has not been corrected with Acoustic Calibration EQ
Professional or when
EQ is set to OFF in the Audio parameter menu (see Setting the Audio options on page 69).
VSX-1018AH_HY.book Page 24 Wednesday, February 27, 2008 9:08 PM