Operating range of remote control unit, Controls and displays 04 – Pioneer VSX-1018AH-S User Manual
Page 25
Controls and displays
04
25
En
11 Listening mode buttons
AUTO SURR/STREAM DIRECT – Switches between
Auto surround mode (
Auto playback on page 29) and
Stream Direct playback. Stream Direct playback
bypasses the bass/treble controls for the most
accurate reproduction of a source (page 32).
HOME THX – Press to select a Home THX listening
mode (page 30).
STANDARD SURROUND – Press for Standard
decoding and to switch between the various
2 Pro
Logic IIx and Neo:6 options (page 29).
ADVANCED SURROUND – Use to switch between
the various surround modes (page 30).
STEREO/A.L.C. – Switches between stereo playback,
Auto level control stereo mode and Front Stage
Surround Advance modes (page 31).
12 MULTI-ZONE controls
If you’ve made MULTI-ZONE connections (see
MULTI-
ZONE listening on page 57), use these controls to control
the sub zone from the main zone (see
Using the MULTI-
ZONE controls on page 58).
13 SPEAKERS
Use to change the speaker system (page 55).
14 ST +/–
Use to select preset radio stations (page 35).
Operating range of remote control unit
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver’s remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
STA
NDBY
/ON
7m
30°
30°
VSX-1018AH_HY.book Page 25 Wednesday, February 27, 2008 9:08 PM