Connecting an external decoder box (1), Connections, Connecting an external – Pioneer DVR-550H-S User Manual
Page 19: Decoder box (1), Coaxial hdmi out, Output input 3
Connections
19
En
02
Position the IR transmitter end of the G-
LINK™ cable so that the IR receiver on your
cable/satellite/digital terrestrial receiver will
pick up the control signals (see diagram).
See the manual that came with your cable/
satellite/digital terrestrial receiver if you’re
not sure where the IR receiver is on the front
panel. Alternatively, experiment with the
remote control, operating it from very close
range until you find the place where the
receiver responds.
Tip
• This recorder has a ‘through’ function
which allows you to record a TV
programme from the built-in TV tuner in
this recorder while watching a video
playing on your VCR (To use this feature
when the recorder is in standby,
Power
Save
must be set to
Off
— see
Power
Save
on page 113).
Connecting an external
decoder box (1)
If you have an external, dedicated decoder
box for your satellite or cable TV system, use
the setup described on this page. See above
for how to connect the G-LINK™ cable.
Important
• Do not connect your decoder box directly
to this recorder.
• Information from the decoder (for
example, relating to pay TV services), is
only viewable when this recorder is off
(in standby).
• For timer recording to work properly on
this recorder, the VCR/satellite receiver/
cable box must also be switched on
during recording.
• It is not possible to watch one TV
programme and record another using
this setup.
1
Connect the cable from the antenna/
cable TV outlet to the antenna input on
your VCR/satellite receiver/cable box.
2
Use a SCART cable (not supplied) to
connect your decoder to your VCR/
satellite receiver/cable box.
See the manual for your decoder box for
more detailed instructions.
3
Use a SCART cable to connect your
VCR/satellite receiver/cable box to the
AV2 (INPUT 1/DECODER) AV connector
on this recorder.
4
Use a SCART cable to connect the AV1
(RGB)-TV AV connector to your TV.
CONTROL
G-LINK
IN
AV 1 (RGB) – TV
AV 2 (INPUT 1/DECODER)
S-VIDEO
O
OUTPUT
INPUT 3
G-LINK cable
AC IN
DIGITAL
AUDIO OUT
COAXIAL
HDMI OUT
CONTROL
G-LINK
IN
AV 1 (RGB) – TV
AV 2 (INPUT 1/DECODER)
S-VIDEO
VIDEO
AUDIO
L
R
OUTPUT
INPUT 3
COMPONENT VIDEO OUT
Y
P
B
P
R
ANTENNA
IN
OUT
TV
Antenna/cable TV
wall outlet
VCR/Satellite receiver
/Cable box
Decoder
1
2
3
4
From SCART AV
connector
To SCART AV
connector
SCART AV
connection
AV2 (INPUT 1/
DECODER)
AV1 (RGB) - TV
To antenna input
DVR550H_WV_EN.book 19 ページ 2006年12月28日 木曜日 午後4時21分