Pioneer AVIC-S2 RU - Manual (Page 65)

5.6 Advanced settings
These screens let you set a large number of different advanced settings and initiate
some special functions. These settings and functions are divided into groups.
Tap on any button to set the corresponding parameters. They all open new windows
where you can make your desired changes.
5.6.1 Regional settings
Here you can set the measurement units, coordinate, date and time formats used by
AVIC-S2.
5.6.1.1 Units
You can set the distance units to be used by the program. AVIC-S2 may not support
all of the listed units in some voice guidance languages. If you select a measurement
unit that is not supported by the chosen voice guidance language, you will see a red
warning message under the selector.
5.6.1.2 Coordinate display format
Positions are sometimes displayed with their addresses, and sometimes with their
coordinates. This setting lets you choose between displaying coordinates in degrees
(dd.dddddd); degrees and minutes (dd mm.mmm); or degrees, minutes and seconds
(dd mm ss.s).
Note: the coordinate display mode is independent from the coordinate input in Find
menu. You can use all three formats freely on the coordinate input screen.
5.6.1.3 Set Date & Time Format
You can set the date and time format displayed by AVIC-S2. Various international
formats are available.
65