Battery status (no. 12), Sound muting (no. 13), Track log recording/playback indicator (no. 14) – Pioneer AVIC-S2 RU User Manual
Page 31: 10 battery, Status (no. 12), 11 sound, Muting, No. 13), 12 track log recording/playback indicator (no. 14)

4.3.10
Battery status (No. 12)
The status of the battery is also shown by AVIC-S2. You can estimate the available
power reserve from the length of the bar inside. Some examples:
•
The thunderbolt in the battery shows the battery is connected to external
power and being charged.
•
Battery is not charging, and it is at full capacity.
•
Battery in not full, but there is sufficient reserve capacity.
•
Battery needs recharging.
4.3.11
Sound muting (No. 13)
By tapping this button you can quickly mute all sounds of the device. This will not
modify the volume level and the enabled or disabled status of the key sounds, just
mutes the sound output. When muting is enabled, the speaker icon is crossed out.
Tap again to enable sounds.
4.3.12
Track Log recording/playback indicator (No. 14)
When a track log is being recorded, a red icon is displayed on the map screens. This
icon also functions as a button leading to the Track Log screen (Page 43) where you
can stop the recording or make the track log visible on the map.
During track log playback a green icon will blink. Tapping this icon (in fact, tapping
the screen anywhere) stops the simulation.
31