Pioneer AVIC-S2 RU - Manual (Page 44)

Tip: If you wish to see the track log currently being recorded, tap on it twice to make
it visible.
In this screen you have the following options:
• Record: this will initiate track log recording. A new line appears in the list, and
GPS position data will be saved until you stop the recording or exit AVIC-S2. A red
icon (Page 31) is shown on the map screens to let you know that a recording is in
progress. Tapping that icon opens this Track Log screen.
• Stop recording: if recording is in progress, this buttons stops it.
• Info: this button opens a screen that shows the track log details, and lets you:
• change the name of the track log (Rename button),
• change the colour of the track log (Colour on the map selector),
• have it displayed on the map (Fit to screen button),
• or export the data to the SD card in GPX format (Track export button).
• Replay: push this button to see a simulation of the saved track log on the map. A
green icon (Page 31) will appear on the map screens to let you know it is not a fly
over but a simulation based on a real saved log.
• Delete: you can delete a track log if it is not needed any more. AVIC-S2 will ask
you to confirm this action.
• Track log options: this button in the upper right corner leads to a settings screen
where you can set up the track logging parameters:
• Update interval is how often track points will be saved. Position information is
normally received once a second from the GPS. If you do not need such a
detailed log, you can increase this number to save track log space.
• Current autosave track size: this figure shows how much memory is used by
the automatically saved track logs.
44