Switching between digital and, Analog, Using the external unit 57 – Pioneer DVH-P5000UB User Manual
Page 57: Operating this unit, Switching between digital and analog, Using the external unit

% Use an IP-BUS-RCA Interconnector such
as the CD-RB20 (sold separetely) to connect
this unit to auxiliary device featuring RCA
output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’s manual.
This auxiliary device is automatically set to
AUX2.
# You can only make this type of connection if
the auxiliary device has RCA outputs.
Selecting AUX as the source
% Press SOURCE to select AUX (AUX1 or
AUX2) as the source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 53.
Setting the AUX title
The title displayed for the
AUX1 or AUX2
source can be changed.
1
After you have selected AUX as the
source, use MULTI-CONTROL and select
FUNCTION to display TITLE INPUT.
2
Enter a title in the same way as the
built-in DVD player.
For details concerning operation, refer to En-
tering disc titles on page 34.
Switching between digital and
analog
When this unit is connected to the DEQ-
P6600, you can switch to the AUX mode to
analog or digital. However, when you use
AUX2 as the source, make sure the AUX
mode is set to analog. AUX digital should not
be used with this unit.
1
Press SOURCE to select AUX2 as the
source.
Press
SOURCE until AUX2 appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX2
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 53.
2
Press BAND to switch the modes.
Press
BAND repeatedly to switch between the
following modes:
ANALOG (analog)
— DIGITAL (digital)
Using the external unit
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
Basic operations of the external unit are ex-
plained below. Allocated functions are differ-
ent depending on the connected external unit.
For details concerning functions, refer to exter-
nal unit
’s owner’s manual.
Selecting the external unit as the source
% Press SOURCE to select EXTERNAL as
the source.
Basic operation
Functions allocated to the following opera-
tions are different depending on the con-
nected external unit. For details concerning
functions, refer to the connected external
unit
’s owner’s manual.
% Press BAND.
% Press and hold BAND.
Operating this unit
En
57
Section
02
Operating
this
unit