Pioneer DVH-P5000UB - Manual (Page 19)

! When this unit’s blue/white lead is connected
to the car
’s auto-antenna relay control term-
inal, the car
’s antenna extends when this
unit
’s source is turned on. To retract the an-
tenna, turn the source off. (When you con-
nected a Pioneer multi-channel processor
(DEQ-P6600) to this unit, auto-antenna cannot
be controled.)
Adjusting the volume
% Use MULTI-CONTROL to adjust the
sound level.
With the head unit, turn
MULTI-CONTROL to
increase or decrease the volume.
With the remote control, press
VOLUME to in-
crease or decrease the volume.
Tuner
Basic Operations
When the separately sold display is connected
to this unit, the listed information will appear
on it.
% Select a band
Press
BAND.
# Band can be selected from among FM1, FM2,
FM3 or MW/LW.
% Manual tuning (step by step)
Push
MULTI-CONTROL left or right.
% Seek tuning
Push and hold
MULTI-CONTROL left or right,
and then release.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL.
Note
RDS (radio data system) contains inaudible infor-
mation that helps search for the radio stations.
! RDS service may not be provided by all sta-
tions.
! RDS functions such as AF and TA are only ac-
tive when your radio is tuned to an RDS sta-
tion.
! This unit’s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 21).
Operating this unit
En
19
Section
02
Operating
this
unit