Audio adjustments, Introduction of audio adjustments 43, Using balance adjustment 43 – Pioneer DVH-P5000UB User Manual
Page 43: Using the equalizer 43, Operating this unit, Introduction of audio adjustments, Using balance adjustment, Using the equalizer

Audio Adjustments
Introduction of audio adjustments
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3
Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL to switch between the
audio functions in the following order.
FADER (balance adjustment)
—P.EQ (equalizer
recall)
—EQ-LOW (equalizer adjustment)—
EQ-LOW (equalizer fine adjustment)
—
LOUDNESS (loudness)
—SUB W1 (subwoofer
on/off setting)
—SUB W2 (subwoofer setting)
—HPF (high pass filter)—BASS BOOST (bass
boost)
—SLA (source level adjustment)
# You can also use A.MENU on the remote con-
trol to select an audio menu.
# You can select the SUB W2 only when sub-
woofer output is turned on in
SUB W1.
# When selecting FM as the source, you cannot
switch to
SLA.
# To return to the display of each source, press
BAND.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Use MULTI-CONTROL to select FADER.
Refer to Introduction of audio adjustments on
this page.
# If the balance setting has been previously ad-
justed,
BALANCE will be displayed.
2
Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
FADER :F15 to FADER :R15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FADER :F/R0 is the proper setting when only
two speakers are used.
# When the rear output setting is SUB W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 55.
3
Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
BALANCE :L15 to BALANCE :R15 is displayed
as the left/right speaker balance moves from
left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM
Custom
FLAT
Flat
SUPER BASS
Super bass
Operating this unit
En
43
Section
02
Operating
this
unit