Pioneer DVH-P5000UB - Manual (Page 51)

Setting the DivX subtitle file
You can select whether to display DivX exter-
nal subtitles or not.
! DivX subtitles will be displayed even when
this setting is on if no DivX external subtitle
files exist.
1 Move the thumb pad up or down to se-
lect DIVX SUBTITLE.
2 Click the thumb pad.
3 Move the thumb pad left or right to se-
lect on or off.
! ON – Display the DivX external subtitles
! OFF – Display the DivX subtitles
4 Click the thumb pad.
DivX subtitle is set on or off.
# Pressing RETURN takes you back to the pre-
vious display.
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more then 126 characters are set,
the excess characters will not be displayed.
Setting for digital output
Audio which is outputted from digital output
of this unit can be selected. Normally, set to
STREAM. If this unit
’s digital output is not
used, there is no need to change settings.
! Selecting LINEAR PCM enables you to
switch the output channel if playing the fol-
lowing type of discs. (Refer to Selecting
audio output on page 33.)
— Dual mono mode DVD video discs
— Bilingual DVD-VR discs
1 Move the thumb pad up or down to se-
lect DIGITAL OUTPUT.
2 Click the thumb pad.
The digital output setting is displayed.
3 Move the thumb pad left or right to se-
lect the desired digital output setting.
! STREAM – The Dolby Digital/DTS signal is
output as it is (initial setting)
! LINEAR PCM – The Dolby Digital/DTS sig-
nal is converted to and output as a linear
PCM signal
4 Click the thumb pad.
The selected digital output setting is deter-
mined.
# Pressing RETURN takes you back to the pre-
vious display.
Operating this unit
En
51
Section
02
Operating
this
unit