Pioneer SPH-DA110 - Manual (Page 50)

Customising preferences
10
Chapter
50
Engb
2 Tap [FM Step].
Each time you tap [FM Step] will switch the
FM tuning step between “50kHz” and
“100kHz” while “AF” or “TA” is on.
p The tuning step remains at “50kHz” during
manual tuning.
RDS setting
Limiting stations to regional programming
When “Alternative FREQ” is used, the re-
gional function limits the selection of stations
to those broadcasting regional programmes.
p This function is effective only when the
radio source is set to FM tuner.
1 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
2 Tap [RDS Setup].
The “RDS Setup” screen appears.
3 Tap [Regional] to turn the regional func-
tion on.
n
To turn the regional function off, tap
[Regional] again.
Selecting alternative frequencies
When the tuner cannot get a good reception,
this product automatically searches for a dif-
ferent station in the same network.
1 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
2 Tap [RDS Setup].
The “RDS Setup” screen appears.
3 Tap [Alternative FREQ] to turn the alter-
native frequencies function on.
n
To turn AF off, tap [Alternative FREQ]
again.
p Sound may be temporarily interrupted by
another programme during AF frequency
search.
Switching Auto PI seek
This product can automatically search for a
different station with the same programming,
even during preset recall.
p “Auto PI” can be set only when the source
is set to “OFF”.
1 Display the “System” screen.
Ü For details, refer to Customising the
system settings on page 48.
2 Tap [Auto PI].
Tapping [Auto PI] changes the settings as fol-
lows:
• Off (default) :
Deactivates the Auto PI seek function.
• On
:
Activates the Auto PI seek function.